Product Description
Stone / Rock Processing Jaw / Hammer / Cone Crusher
PE(X) series Jaw crusher, whose size reduction ratio up to 4-6 and the final products are even, can be widely used in crushing hard, medium-hard, soft ore, and various kinds of ore, the solvent, slag, building stones, marble, etc. Compression strength does not exceed 320 Pa. This machine is suitable for mining, building construction, highway, railway, water conservancy and chemical industry.
Model |
Size of Feed Opening(mm) |
Max Feed Size(mm) |
Adjustable Range of Discharge(mm) |
Crushing Capacity(tph) |
Electric Motor Power(kW) |
Weight(Excluding Electric Motor)(t) |
PE-150×250 |
150×250 |
130 |
10-40 |
0.96-4.8 |
5.5 |
0.81 |
PE-250×400 |
250×400 |
210 |
20-80 |
5-21 |
15 |
2.8 |
PE-400×600 |
400×600 |
340 |
40-100 |
16-64 |
30 |
6.5 |
PE-500×750 |
500×750 |
425 |
50-100 |
45.6-100 |
55 |
10.3 |
PE-600×900 |
600×900 |
500 |
65-160 |
48-120 |
55/75 |
15.5 |
PE-750×1060 |
750×1060 |
630 |
80-140 |
115-208 |
110 |
25.1 |
PE-800×1060 |
800×1060 |
650 |
100-200 |
136-228.8 |
110 |
28.3 |
PE-870×1060 |
870×1060 |
670 |
200-260 |
288-384 |
110 |
28.7 |
PE-900×1200 |
900×1200 |
750 |
100-200 |
144-304 |
132 |
43.3 |
PE-1000×1200 |
1000×1200 |
850 |
195-265 |
315-342 |
132 |
50.6 |
PE-1200×1500 |
1200×1500 |
1000 |
150-350 |
300-800 |
220 |
78.14 |
PE-1500×1800 |
1500×1800 |
1200 |
220-350 |
450-1000 |
355 |
122 |
PEX-250×750 |
250×750 |
210 |
25-60 |
8.0-22 |
22 |
5.1 |
PEX-250×1000 |
250×1000 |
210 |
25-60 |
16-51.2 |
30/37 |
6.5 |
PEX-250×1200 |
250×1200 |
210 |
25-60 |
20-60 |
37 |
7.7 |
PEX-300×1300 |
300×1300 |
250 |
20-90 |
16-104 |
75 |
11 |
Detailed Photos
Jaw Crusher uses motor as its power. Through the motor's wheels, the eccentric shaft is driven by V-belt and groove wheel to make the movable jaw move by a regulated track. Therefore, the materials in the chamber that consists of fixed jaw, movable jaw and side- plate can be crushed and discharged through the discharge opening.
|
Structure of Jaw Crusher
|
Working Principle
HCC series single cylinder hydraulic cone crusher, a kind of cone crusher with advanced technology in the world, has not only the features of high reliability, but also the feature of high crushing efficiency, low operation cost, and good shape of the end products. It is widely used in mining and gravel aggregate industries, and is suitable for crushing various materials with hard and above medium hardness.
There're various options for cavities. By proper chamber and eccentricity, it meets the customer's maximum demand for production and high output. Under the condition of full feeding, it can realize laminating crushing, and make better material for the products.
Low Vulnerable Part Consumption and Low Operation Cost
The discharge opening can be adjusted timely and conveniently with hydraulic adjusting design, which realizes full load operation, lower wear parts consumption and reduces operation cost.
Easy Chamber Exchange
Due to the same body structure, we can get different crushing chamber by changing the liner plate to fulfill the various processing requirement for primary and fine crushing.
Advanced Hydraulic Technology Offers Easy Operation and Maintenance
Adopting advanced hydraulic technology, the overload protection can be realized effectively, which simplifies the structure of crusher and reduces its weight. All maintenance and inspection can be fulfilled through the top of the crusher, achieving easy maintenance.
Large Feeding Inlet Design
Large feeding inlet design is adopted by S type HCC series cone crusher to provide good mating with primary jaw crusher and the crushing capacity can be greatly increased. While processing gravels, it can replace jaw crusher for primary crushing.
Application Scope
Hydraulic cone crusher is one of the most commonly used mining equipment, which is widely used in mineral processing, construction materials, silicate and chemical industries. In the production of small scale, medium scale or large scale mineral processing plants, it is generally used as the secondary and tertiary crushing machine to crush hard or medium hard metal ores of gold, silver, copper, lead, zinc, nickel, manganese, iron, molybdenum, chromium, tin and others, as well as stone, rock, granite, limestone, barite, quartz, graphite, feldspar, fluorspar, etc.
est
Packaging & Shipping
FAQ
Q1: Are you trading company or manufacturer?
A: We are a professional factory with 37 years' experience.
Q2: How long is your delivery time?
A: Generally it is 7-10 days if the goods are in stock. Or it is 15-30 days if the goods are
not in stock, it is according to quantity.
Q3: What is your payment method?
A: 30% deposit in T/T advance, 70% balance before shipment.
Q4: How long is the warranty of your equipment? Does your company supply the spare parts?
A: The warranty period of crusher equipment is one year. And we will supply the spare parts for you at lowest cost.
Q5: If I need the complete crushing plant can you help us to build it?
A: Yes, we can help you set up a complete crushing line and give you related professional advice as long as you need. We had already build many mining projects in China & Overseas.