High Quality Mineral Purification Machine Small Mercury Amalgam Distill Retort, Gold Refining Machine

• Type: Mineral Purification Machine
• Voltage: 380V
• Weight: <1T
• Material: Carbon Steel
• Material Feature: Heat Resistant
• Certification: ISO9001:2008
• Model NO.: cz
• Energy Saving: Energy Saving
• Warranty: 1 Year
• Color: Customized
• Customized: Customized
• Condition: New
• Transport Package: Steel Plate Package
• Trademark: cz
• Origin: China
• Production Capacity: 5000PCS/Year

Product Description

Product Description

Mercury distiller is a distillation equipment commonly used in small and medium-sized mines. Because the gasification temperature of mercury is lower than the melting point and boiling point of gold, the mercury and gold in the mercury paste are separated by distillation, and the solid mercury paste produced by the gold concentrator can be distilled regularly. During operation, the solid amalgam is placed in a sealed cast steel tank, the roof of which is connected to an iron pipe containing a condensing pipe. The can is heated in a heating furnace such as coke, gas or electric furnace, and when the temperature slowly rises to 356 degrees, the mercury in the mercury paste is vaporized and escapes along the iron pipe, and is recovered in a spherical drop below the container of water after condensation. In order to fully separate the mercury in the mercury paste, many gold processing plants will control the temperature of mercury evaporation at 400-450 degrees, and the temperature will rise to 750-800 degrees in the later stage of mercury evaporation, and remain for 30 minutes. The mercury evaporation time is 5-6 hours, and the recovery rate of mercury in the mercury evaporation operation is usually greater than 99%. Small and medium-sized mines use multi-purpose distillation tank for mercury distillation, and large mines use distillation furnace.

Product Advantage

1, Small size, easy to carry and transfer.
2, High distillation efficiency, simple operation.
3, Compact design, unique water cooling device, to ensure that mercury completely liquefied.
4, Mercury evaporator special empting device, to avoid the end of distillation in the tank residual mercury vapor         harm to the human body.
5, Mercury can be reused, reduce pollution, safety and environmental protection.

Detailed Photos

Product Parameters

size	420x600 mm
volume	0.3 m3
ball loading	10-20 KG
capacity	50-90KG
power	0.75-1.5 KW

Operation method
 

1. Put the amalgam mercury mix with gold into the sealed cast iron tins. There is a condenser tube connected with the top of the iron can.
2. Heat the steel can on the Coke, gas or electric furnace
3. When the temperature reached 356°C, the amalgam will gasification, the mercury gas will run out through the iron tube 
4. The gas mercury will become Spherical droplets after go through the condenser tube, and then you can recycle the mercury.
5. In order to separate the mercury completely, gold mining plant usually maintained the temperature on 400-450°C. And in the last 30 minutes, raised the temperature to 750-800°C.
6. Distill the mercury for around 5-6hours, the gold recovery rate can reach 99%.

Packaging & Shipping

FAQ

1. What is the leading time ?
For shaking table and laboratory mining equipment ,we can send out within 10 days;
For large mining equipment and customized machine, the lead time is 30-40 days.

2. What is the nearest Sea port ?
Xiamen Port, Guangzhou Port, Shenzhen Port

3. What is the trade terms ?
CIF,FOB ect is acceptable.

4. What normal mining procedures including?

A. Sampling and analysis of the sample. take enough sample from different location and depth, analysis the size distribution and
element.

B. Engineer and geologist site survey. based on the analysis report at stage one, the geologist will determine the reserve and
mining area. the engineer will consider the plant location and process flow.

C. Separation test. take samples to do separation test based on the process flow on stage Two.

D. Based on the result of testing, adjust the process flow if necessary.

E. Determine the capacity of the plant based on the quotation of plant and estimated output.

F. Place order and equipment production.

G. Plant design. ground clearance and basement building according to the design.

H. Plant installation and testing production.

I. Training and debugging.

5. What Information should customers give to us ?

In order to let we provide you with efficient & suitable quotation and assistance.

1). What type is the mining? Is it rock stone? or it is sand?
2). If rock stone,What is the general particle size(mm) of the raw ore?
3). What is the handling capacity(tons per hour) you plan to work with?
4).What is the elements of the raw ore? How much percent % of each minerals?